TUBULAR ALUMINUM CABLE LUG WITH COPPER RING


Kat. br. serije 370000
Tip: AlCuS
Materijal: DIN 1746
Ed Cu EN 13600
Standard: SRPS N.F4.101

TUBULAR ALUMINUM CABLE LUG WITH COPPER RING

Tubular Aluminum Cable Lugs with Copper Ring are used to achieve reliable joint between ends of aluminum conductors made according to Standards DIN 48201/1 and DIN EN 50182 and copper surfaces (copper cable trays, contacts of switches, etc.). Their technical characteristics enable easy installation and formation of joints in accordance with Standard SRPS N.F4.101. The inside of the Lug is protected with electrical contact grease. The Lugs are marked in order to ensure correct crimping. The picture shows correct crimping. The achieved joint is not meant for mechanical tightenings.

TUBULAR ALUMINUM CABLE LUG WITH COPPER RING

 

Kat. br. serije 370400
Tip: AlCuD
Materijal: DIN 1746
Ed Cu EN 13600
Standard: DIN 46239

Tubular Aluminum Cable Lugs with Copper Ring are used to achieve reliable joint between ends of aluminum conductors made according to Standards DIN 48201/1 and DIN EN 50182 and copper surfaces (copper flat bars, contacts of switches, etc.). Their technical characteristics enable easy installation and formation of joints in accordance with Standard DIN 46239. The inside of the Lug is protected with electrical contact grease. The Lugs are marked in order to ensure correct crimping. The picture shows correct crimping. The achieved joint is not meant for mechanical tightenings.

TUBULAR ALUMINUM CABLE LUG WITH COPPER RING


Jubilee

Contact

MAREL D.O.O.
VELIKO GOLOVODE b.b.
37000 KRUŠEVAC, SERBIA
Phone: +381 (0)37 35-66 262,
(0)37 35-66 266

e-mail:
marel@marel.rs