Kat. br. serije 370900
Tip: AlCPS
Materijal: DIN 1746
Standard: SRPS N.F4.101
Tubular Aluminum Lugs are used at the ends of aluminum conductors made according to Standards DIN 48201/1 and DIN EN 50182. Their technical characteristics enable easy installation and formation of joints in accordance with Standard SRPS N.F4.101. The inside of the Lug is protected with electrical contact grease. The Lugs are marked in order to ensure correct crimping. The picture shows correct crimping. The achieved joint is not meant for mechanical tightenings.
Kat. br. serije 371000
Tip: AlCPD
Materijal: DIN 1746
Standard: DIN 46329
Tubular Aluminum Lugs are used at the ends of aluminum conductors made according to Standards DIN 48201/1 and DIN EN 50182. Their technical characteristics enable easy installation and formation of joints in accordance with Standard DIN 46329. The inside of the Lug is protected with electrical contact grease. The Lugs are marked in order to ensure correct crimping. The picture shows correct crimping. The achieved joint is not meant for mechanical tightenings.
