Insulated Piercing Connectors

1,5-10/16-95mm² CESp/CNT 95
1,5-16/10-95mm² CES/CT 95
1,5-35/6-150mm² CES/CNT 150
1,5-6/70-185mm² CESp/CNT 185
4-50/35-150mm² CBS/CT 150
6-35/50-150mm² CBS/CT 150
2,5-35/16-95mm² CBS/CT 95; CBSp/CNT 95
2,5-50/25-120mm² CBS/CT 120
4-50/35-185mm² CBS/CT 185
10-95/10-95mm² CDRS/CNT 95
16-95/16-95mm² CDRSp/CNT 95
6-70/16-95mm² M2 IOS
4-35/16-70mm² IOS 1
16-70/16-70mm² IOS 2
IOS 2/2 2X16-35/16-70mm²
ML 95 1,5-70/10-95mm²
16-150/16-150mm² CDRSP/CNT 150
25-150/25-150mm² CDRSp/CNT 150
35-240/35-240mm² CDRS/CT 240
2,5-35/16-95mm² 2p CBSp/CN 95 2p
16-95/16-95mm² 2p CDRS/CT 95 2p
25-150/25-150mm² 2p CDRS/CT 150 2p
2,5-35/16-95mm² 2p CBS/CT 95 2p
25-150/25-150mm² 2p CDRSp/CNT 150 2p
25-185/50-240mm² 2p CDRSp/CNT 240 2p
35-240/35-240mm² 2p CDRS/CNT 240 2p
70-240/70-240mm² 2p CDRS/CT 240 2p
INSULATED PIERCING CONNECTOR FOR BARE MAIN LINES
UNIVERSAL INSULATED WRENCH
AERIAL FUSE-HOLDER VOS
INSULATED WATERPROOF ADAPTER
PRE-INSULATED MECHANICAL JOINT IVA
IOS 3 Al 16-70mm² / AlCu 4x(6-35mm²)
IOS 4 Al 16-70mm² / AlCu 2x(6-35mm²)
IOS 3M-B Al 16-95mm² / AlCu 4x(6-35mm²)
INSULATION PIERCING CONNECTOR TYPE M
INSULATED PIERCING CONNECTOR WITH FUSE 1,5-35/16-95 mm² FC 95
PRE-INSULATED JOINT WITH INTEGRATED FUSE MJPF
END CAP
PROTECTION CAPS

INSULATION PIERCING CONNECTOR TYPE M

KAT. BR./CAT. NO. 375000 | KOD/CODE: M | STANDARD: NF C 33-020 | EN 50483-4

Insulated Connector IOS 4 is designed to establish contact by piercing the insulation on LV ABC conductors and to connect network connection or street lighting conductors. The connector is made in such a way that it enables connection of LV ABC and network connection line regardless of whether it is an aluminum or a copper conductor. When the bolt is tightened the teeth of contact plates pierce through the insulation and establish an excellent contact on the main line without need to strip the insulation, while on branch lines the insulation is stripped in the length of 18 mm. Tightening torque is 20 Nm. The contact plates are protected with electrical contact grease. The connector can be used/installed only once.

Branch line conductor can be freely connected, disconnected and changed.
Branch line must not be under load.