ML 95 1,5-70/10-95 mm²

Marel Insulated Connector ML 95 is designed to establish contact by simultaneously piercing the insulation on LV ABC conductors and network connection or street lighting conductors. The connector is made in such a way that it enables connection of LV ABC and network connection line regardless of whether it is an aluminum or a copper conductor. When the bolt is tightened the teeth of contact plates pierce through the insulation and establish an excellent contact on the main as well as on the tap line, without need to strip the insulation. Tightening torque is 20 Nm. The contact plates are protected with electrical contact grease. The connector can be used/installed only once.

Packaging: 50 pcs
Weight: 12,70 kg/100 pcs

Nominal tightening torque: 20 Nm;
Torque at which first contact is established: 5 Nm.

RANGE OF USE:
Cross section of the main line 10 to 95 mm²;
Cross section of the tap line 1,5 to 70 mm².