IOS 3 Al 16-70 mm² / AlCu 4x (6-35 mm²)

Insulated Connector IOS 3 is designed to establish contact by piercing the insulation on LV ABC conductors and to connect network connection or street lighting conductors. The connector is made in such a way that it enables connection of LV ABC and network connection line regardless of whether it is an aluminum or a copper conductor. When the bolt is tightened the teeth of contact plates pierce through the insulation and establish an excellent contact on the main line without need to strip the insulation. It is possible to derive 1-4 branch lines where the insulation is stripped in the length of 18 mm. Tightening torque is 18 Nm. The contact plates are protected with electrical contact grease. The connector can be used/installed only once.

• Branch line conductor can be freely connected, disconnected and changed.
• Branch line must not be under load.

RANGE OF USE:
Cross-section of the main line 16 to 70 mm²:
Cross-section of the tap line 6 to 35 mm².

Packaging: 25 pcs
Weight: 22,90kg/100 pcs